- Home
- scooter reinforced folding hook M365 Pro scooter hardened and thickened folding buckle zipper
Categories
- Accessories (592)
- Air & Oil Filters (270)
- Axle & Shaft & Camshaft (61)
- Bearings & Gaskets & Washers (1598)
- Belt (398)
- Body (577)
- Bolt & Nut & Screw & Adaptor (1175)
- Brakes (403)
- Bushing (2)
- Cable (421)
- Carburetor (661)
- CDI & Ignition & Spark plug & Solenoid (289)
- Chain (16)
- Charger (22)
- Clutch (757)
- Covers & Caps (314)
- Cylinder (996)
- Engine (114)
- Exhaust (975)
- Fender & Mudguard (149)
- Frame (26)
- Fuel pump & tank & accessories (223)
- Gear & Gear Cog (234)
- Handlebar & Throttle grip (794)
- Headlight (345)
- Luggage Carrier (198)
- Mirrors (108)
- Mouting plate & Floor board & Side panel (99)
- Pedal & Kickstart (165)
- Regulator (73)
- Repair Kit (45)
- Seat Belt (3)
- Seats & Covers (296)
- Spares (1)
- Speedometer (89)
- Spring (327)
- Sprocket (14)
- Starter (87)
- Steering (58)
- Suspension (696)
- Switch (176)
- Tools (499)
- Wheels and Tires and rim (641)
- Windshields (120)
- Wiring Kit (37)
Product tags
scooter reinforced folding hook M365 Pro scooter hardened and thickened folding buckle zipper
SPREAD THE LOVE
Description
High Density Alloy Steel Folding Hook for M365/Pro Electric Scooter Hinge Bolt Lock Screw Part Material: Metal Optional Color: Black, White, Red as picture) High density aviation aluminum material, high hardness, not easy to bend and break, beautiful appearance Stronger than normal folding buckles. Electroplating process, no fading Features: 1. Reinforced Aluminum Replacement Lock Hinge Repair Lock for M365 Pro 2. Unscrew the old lock and keep the screws safe because you will use the same screws as spare parts. 3. To drill the pin, you need to make sure you are doing it from the correct side. Make sure to do this from left to right (looking from the front of the scooter, not the side of the steering wheel). Put down the scooter and put something sturdy under the folding mechanism. Be careful with cables! Push them away before every punch or you’ll break them. 4. Apply lubricant, oil or WD40 to the spindle and let it sit for a while. Some clients prefer to use hot air instead of slightly heating the saliva. 5. Take a 4mm punch and hit it hard a few times. Pay attention to the cables again. 6. Take a new lock and replace it with the same screws. 7. Turn the scooter upside down as the pins need to be inserted on the other side (right to left when looking from the front of the scooter) 8. Be sure to follow the pins. Put the spindle inside and reapply the punch tool. He should have easy access. Hit it until it lines up on both sides. 9. Readjust your axle lock/bolt to ensure the new lock is properly bent. Don’t over-tighten it, but don’t make it too loose either (as long as there is enough resistance and no gaps in the rod/hinge). Product Category
electric scooter
For people
aldult
weight
0.04 (kg)
article number
MI00201-R
Origin
China
color
Red Reinforced Folding Hook + 1 Pin, Black Reinforced Folding Hook + 1 Pin, Silver Reinforced Folding Hook + 1 Pin, White Original Millet Folding Buckle + 1 Pin, Black Original Millet Folding Button + pin 1