Grips “Antique” 22/22 mm l 120 mm

for Vespa 150 GS/
S2-5/
3/
4
with “Vespa” emblem
for
22/22mm tubes
l 120 mm
ECO quality
light grey RAL 7035

Grade B – decent repair
Product description
A high-end reproduction of the original PIAGGIO bar-
grips
to the exact original dimensions. This is also true for the colour and the shape. They come with a design similar to the earlier shield-shaped PIAGGIO emblems. They are available in grey, light-grey, beige/grey (earlier model colours) and black. The later models carry the hexagonal PIAGGIO emblem.

Furthermore we also have
grips
in
premium quality
on offer. These are produced using high quality and UV-stable rubber that does not harden or lose its colour. With their “Antic” intricate diamond-shaped design, including the earlier PIAGGIO-emblem they equal the originals in quality and design down to the final detail.

Note: Please make sure of the correct measurements when ordering your new grips. (Circumference and length of both throttle and gear grips, they are sometimes different !) Grips with identical dimensions are interchangeable. The earlier grips are just a little too short, so leaving a noticeable gap between the inner grip and the handlebar cover of later largeframe models. This can be solved by shortening the handlebar tubes themselves.

The easiest way to remove your old handlebar grips is to carefully cut them open along their whole length using a carpet knife or similar. To soften the new grips enough to push them over the bar ends we recommend you leave them in very hot water for 10 minutes beforehand. Please remember to use gloves or a thick piece of cloth to stop your fingers getting burnt.
Which gray matches my scooter
nWe have attempted to avoid subjective terms of definition with the grey tones, such as bright-grey, dark-grey etc. to sort and differentiate between them using the RAL classic colour system of number codes. The RAL colour palette is internationally recognised, can easily be located online or – even better – be directly compared using a folding array RAL colour sample collection (#
98889900
). But even then the various shades are sometimes hard to define. Even considering this, we find that it makes the selection of suitable replacement rubber components simpler for each type of scooter re/build project and leads to a more harmonious match to the existing rubber attachments particular tone.
Pebble, Agate and Silk grey shades look great on scooters with their original factory paintwork as they most closely resemble the worn and sun-bleached original existing components.
Light-grey parts however look best when combined with newly restored scooters or those with custom paintwork. (RAL grey shades see article download)