Fuel Injection Module PM Tuning, TFI

For race use only. Not admitted in the area of the German StVZO!
Product description
The TFI was designed and developed to provide an affordable solution to increasing the fun factor or ridability of your scooter. With todays pollution regulations, many if not all of todays scooters are setup extremely lean to meet these regulations. Unfortunately they are not always the best setup for performance or ridability. Therefore, adjusting the air fuel ration on these machines is essential to achieve optimum performance and ridability. Ease of use The unit is a simple plug and play unit with is already pre programmed and set-up ready to go! The TFI is not an interceptor and it does not alter factory air/fuel computer tales or pulse-width calculations. It taps into the injector-driver circuitry of a stock scooter’s EFI and selectively appends extra pulse-width voltage keeping injector’s open the exact incremental time required for precise fuel enrichment. The scooter’s on-board computer and wiring harness remain intact, with no wires needing to be cut. The stock air-fuel Map remains intact, as does its correlation to the engines volumetric efficiency (breathing) curve.The TFi is simple to adjust. Four adjustable dials (pods) and circuitry in the control unit (1) define the breakpoint between cruise and main-jet RPM, (2) the length of time and magnitude for auxiliary transitional enrichment, (3) and the incremental enrichment in tenths of milliseconds for the three operating ranges. The TFI unit is available as a pre programmed module to optimise the PM68 fuelling requirements with easily adjustable function should a different setup be required (E.G. using it with the standard exhaust system or other after market tuning parts) and can also be done at the side of the road if needed. Full instructions are available from PMs website www.pmtuning.co.uk Customers’ feed back about the TFI unit From Alan in New York USA – ” took the fuel module off, The scoot felt dead without it. What a difference in power that thing makes, it’s like day & night. You’ll never know it till you ride with it for a week & then take it off”
Information:
Regrettably PM is amongst our most unreliable suppliers. We attempt to compensate for these production inconsistencies by mass ordering whenever the opportunity arises and parts are truly available. This method is no guarantee however and we cannot always meet deliveries immediately when these provisions are all sold out. We are satisfied to be able to offer similar products from mit JL, NORDSPEED, PERFORMANCE, to compensate for any potential deficit in the supply of PM parts. PM products will still be sold at our shop as we willingly support the careful artistry involved in the creation of such specialist, niche parts by such dedicated engineers.