Intake Manifold MMW2 35mm

for Vespa 125 VNB-TS/
50 VBA-Super/
ally/
X80-200/
E/
usso/
5/
osa
for TMX 32-35/PWK 33-35/KOSO 28-34 carburettor
inner diameter: 35mm
outer diameter: 40mm
w/o YAMAHA RD360 reed valve/70
reed valve, with aluminium connecting piece/screws Product description
German tuning experts MMW have now been manufacturing specialist high end components at the highest quality levels for several years. The MMW RD350 reed valve manifold is a thrill to every tuner. In its second version (MMW2), the successor to the legendary MBD intake manifold boasts some big improvements. The CNC milled MMW manifolds have a very smooth, flow optimised surface and can be driven both with the conventional RD350 as well as the newer TASSINARI reed valve. Limited modifications to the connection piece are required for the TASSINARI reed valve.
The MMW intake manifold is available in two versions. Similar to the MBD intake manifold, the basic MMW 1 version has a slanting (45
) reed valve. By extending the intake duct (spacer is included in the scope of supply) engines gain support and achieve more torque through the shifting of the useful rev range. The bigger intake diameter also permits a higher inflow speed. In combination with the streamlined design this guarantees a maximum fill level. On the optimised MMW 2 version, the intake cross section was further enlarged and the position of the reed valve changed so that it is now positioned at an angle of 70
lengthways to the crankshaft. Both versions of the intake manifold are supplied with a suitable aluminium connection piece and set of screws. The connection pieces and the gaskets and screw sets required for assembly are also available individually. The original fastening points are maintained on installation. No welding is necessary on the crankcase.
The manifolds are also available including the RD350 reev valve block.
Conclusion:
A high quality product that is made in Germany. Perfectly designed intake manifolds for high end tuned engines.

With i
0mm outlet size and connection carburetor 36mm , the intake manifold is suitable for the:
MIKUNI TMX 27-30mm
DELL’ ORTO PHBH 28-30mm/ VHST 24-28mm/ VHSH 30
PWK/KOSO/SERIE PRO 28-32mm (connection
6mm).

With
6mm outlet size and connection carburetor 40mm , the intake manifold is suitable for the:
MIKUNI TMX 32-35
PWK/KOSO/SERIE PRO 28-32mm (connection
9mm).

With
8mm outlet size and connection carburetor 44mm , the intake manifold is suitable for the:
MIKUNI TMX 38mm
DELL’ ORTO VHSB 34-38/VHSC 39,5mm
PWK 38mm

Order the reed valve block RD 350 (part no 40310000), the reed valve block gasket (part no 78544000), and the matching connection rubber (e.g. for
5mm part no0136) at the same time. The intake manifold gaskets (part no 92200300 (LML), 92200100 (MMW1), 92200200 (MMW2)) are also required.