Racing Cylinder MALOSSI MHR 2016 210 cc

for Vespa 200 Rally/
200E/
X200 E/
usso/
98/
Y/
osa 200
aluminium
7 ports

68,5mm
stroke 57mm
1 piston ring(s)
w/o cylinder head

TUNING RACE – for professionals

For race use only. Not admitted in the area of the German StVZO! Product description
The one and only! The MALOSSI 210cc cylinder is the undisputed number one in the big-block division of Vespa tuning! The finest production quality, enduring reliability and perhaps most important
seemingly endless reserves of revs and power in all situations! MALOSSI
s latest incarnation is available as two types: The ‘Sport’ as a road-going tourer, or the ‘MHR’ meant for track-based racers or just plain-old power junkies! Both versions represent the very best qualities that can be found in a tuning cylinder worthy of powering your personal pride and joy. Recently a engine set up with the ‘MHR’ version of this cylinder was measured with a staggering 40PS power output at the rear wheel. As far as genuinely affordable power goes, there is no way around the MALOSSI when searching for a suitable tuning cylinder. The main arguments for the tuning kits of MALOSSI are
big performance increase
very good durability and long life
wide range of application from ROAD to RACE tuning
High end aluminium casting, enduring Nicasil lined bore, 7 transfer ports with a potent cross-sectional area create the basis of a reliable and thermally uncritical performance cylinder. The combination of the patented MALOSSI CVF2 porting system and the range of solid pistons available are more than capable of supplying the combustion chamber with sufficient amounts of fresh fuel charge to be turned into raw power, while simultaneously guaranteeing an enduring delivery of huge dollops of performance from your Vespa! What are the differences to the “old” racing cylinder MALOSSI 210
nin the revised transfer port layout. The side port windows have been completely laid-open and the channels massively enlarged
The port windows have also been enlarged and the redesigned boost port is immediately obvious
Upon closer inspection it now comprises of three channels, instead of two
All kits are available with an optional MALOSSI High Turbolence Squish Racing (HTSR) cylinder head and come with an ‘Oring gasket
The MALOSSI cylinder kits produced since 2016 are delivered including a VERTEX piston with a graphite skirt surfacing material. This cutting-edge technology reduces friction considerably and can also function as an emergency damage-reducing solution in case of heat-seizure. Compared to the ASSO piston that was included with the pre-2016 Mk II version of their 166cc cylinder, the VERTEX piston is around 10% lighter. The skirt of the latest piston is shorter which eliminates the need for extra modifications when attempting to fit a long-stroke crankshaft. The port windows are noticeably larger on the VERTEX piston and also provide a much improved match to those found on the bore of the cylinder. This new piston type is compatible with all generations and standard types of the 210cc cylinders.The MALOSSI MHR’ and MALOSSI Sport versions can be told apart by
the different size of the outlet ports
The ‘MHR’ also has only one piston ring
More extreme port timings
Additionally available in two types to cater for both 57mm and 60mm stroke crankshafts being fitted
The ‘Sport’ version has a piston with two piston rings and can only be combined with 57mm stroke crankshafts
The carburettor sizes, recommended by MALOSSI, for combination with this pair of cylinders is a maximum size of 30mm for the ‘Sport’ and a minimum of 30mm for the ‘MHR’ to properly exploit their full potential. Both cylinder types require a fuel tap with a flow-rate greater than the original type to avoid fuel starvation, carburettor problems and heat seizure. During the development of these kits the MALOSSI technicians made use of our very own
FastFlow Fuel tap
to ensure an adequate supply of fuel.
Conclusion
: If you require a non-compromising race cylinder suitable for all uses the MALOSSI 210cc cylinders cannot be ignored!
Technical details at a glance
Aluminium cylinder
68.5mm bore
210.06cc
‘MHR’ can be ordered to also suit long-stroke (60mm) crankshafts
7 transfer ports
VERTEX graphite coated piston with 1 (MHR) or 2 (Sport) wedge-shaped chromed piston rings
Compression ratios : Without MALOSSI HTSR cylinder head
10.5:1
with MALOSSI HTSR cylinder head 12.5:1
kit includes base and head cylinder gaskets
The Best Setup – Our